1976 Cape Dory 30 Cutter
LOA
9.14m (30.0ft)
Beam
2.74m (9.0ft)
Displacement
4,082kg (8,999lbs)
Year
1976–1983
Manufacturer
Cape Dory
Full Specifications
| Specification | Metric | Imperial |
|---|---|---|
| Dimensions | ||
| Length Overall (LOA) | 9.14 m | 30.0 ft |
| Length Waterline (LWL) | 7.16 m | 23.5 ft |
| Beam | 2.74 m | 9.0 ft |
| Draft | 1.37 m | 4.5 ft |
| Mast Height | 12.00 m | 39.4 ft |
| Weight | ||
| Displacement | 4,082 kg | 8,999 lbs |
| Ballast | 1,814 kg | 3,999 lbs |
| Sailing | ||
| Sail Area | 40.2 m² | 433 ft² |
| Rig / Boat Type | Cutter | |
| Hull Material | Fiberglass | |
| Keel Type | Full | |
| Engine & Tanks | ||
| Engine | 18 HP | |
| Fuel Capacity | 57 L | 15.1 gal |
| Water Capacity | 76 L | 20.1 gal |
| Accommodation | ||
| Berths | 5 | |
| Cabins | 1 | |
| Design | ||
| Designer | Carl Alberg | |
| Country of Origin | USA | |
Performance Ratios
SA/D Ratio
15.99
Moderate — adequate for cruising
Ballast Ratio
44.4%
Heavy ballast — very stiff and stable
Capsize Screening Ratio
0.69 Offshore Capable
Excellent — suitable for offshore passages
Lower is better. Values below 2.0 are considered suitable for offshore sailing.
Comfort Ratio
27.3
Moderate — acceptable for coastal cruising
About the 1976 Cape Dory 30 Cutter
The Cape Dory 30 Cutter is a stout and capable passage maker from Carl Alberg. Her full keel and cutter rig provide excellent heavy-weather balance and offshore security.